You’ve come to the right article if you’re having problems with the Firestick remote, such as it not working at all, not turning on or off the TV, or not turning the volume up and down. For the Firestick remote not working question, we’ve come up with these solutions. Every strategy has been established and tried in the past to ensure that you only receive the greatest answers.
It’s especially aggravating when the Firestick remote stops working after a while of use or when you’re in the middle of a TV show and want to turn up the volume. I’ve dealt with these problems, and the fix was typically quick and simple. However, there are several reasons why a Firestick remote may stop working; whether it’s due to dead batteries, a system problem, or broken devices, there is always a fix. Continue reading the post to learn how to fix the Firestick remote not working issue.
Firestick Remote Not Working Causes
As I quickly said above, there are several reasons why a Firestick Remote stops working, and each one offers a solution. Let’s go over each probable reason and offer a solution for how to fix it.
This happens seldom because the Firestick operating system is well-designed and constantly updated, but it does happen. The problem might be with some of the apps you use or how you handle system navigation. For example, you might press the back button far too quickly, and an operation might still need to be completed. These system faults might range from the device not responding at all to being unable to shut off the TV or simply the volume adjuster not working. These and a lot more problems similar to these occur for no reason, but they can be fixed by the solution provided below.
Solution: Turning off and on the device is the solution to this sort of problem. In this case, try restarting the Firestick device. These problems often don’t recur.
Learn How To Reset Firestick Remote?
The steps may alter depending on the version of the device you have; in this guide, I’m referring to the Alexa Voice Remote Second Gen Remote.
- You need to disconnect your Firestick device and wait at least a minute.
- Then, simultaneously press the ‘Left,’ ‘Menu,’ and ‘Back’ buttons and hold them for at least 30 seconds.
- You are required to release the buttons and wait for 10 seconds after the timer has expired.
- The batteries in the remote should then be removed.
- Now, it’s the moment to plug in the Firestick and wait for it to boot up for a minute.
- Replace the batteries in your remote.
- Then it would be best if you pressed the ‘Home’ button.
That’s all there is to it; you’ve now learned how to reset the Firestick remote.
Damage To The Remote
If the remote does not appear to respond at all, the device is most likely damaged. When this problem happens, one of the first things you should do is inspect the remote for damage. If there is no exterior visible damage, this does not imply that the internal circuit is in excellent working order. Also, you can refund the manufacturer if it is brand new. However, if you’ve been using it for a while and you’ve mishandled the remote (it’s fallen out of your fingers and onto the ground), there’s additional work to be done.
Solution: You need to submit the remote to a professional to determine whether the internal circuit has been damaged so that they may try to fix it. If the expert can’t fix it, it’s time to buy a new one, but make sure you get the right remote for your device. Ensure you’ve ruled out all other options before going on this path.
Dead batteries are one of the most common reasons the Firestick remote stops responding. When the Firestick remote stops working for no apparent reason, this should be one of the first things to check. Furthermore, when the batteries run low, the remote Bluetooth connection might cause problems. However, if you’ve just set up the device, ensure the batteries are in the right position.
Solution: Check to see whether the batteries are dead by replacing them with fresh ones or a pair that you know has juice in it. Also, watch for the right placement of the batteries on your remote. The device is going only to work if they are properly positioned.
- To access the batteries, you first need to remove the remote’s cover.
- Then, you’ll need to remove the old batteries and replace them with fresh ones.
- Then, you must try out the remote and install the fresh batteries.
That’s all there is to it; you’ve now learned how to change the batteries in your Firestick remote.
You won’t be able to do anything with the remote if it doesn’t pair with the Firestick device. There are many reasons why this would occur, but it is unquestionably something that occurs frequently.
Solution: Follow these instructions to learn how to pair a remote to a Firestick device correctly.
- Ascertain that your Firestick device is connected and powered on.
- You must wait a few seconds for the device to power up.
- Hold the remote close to the Firestick device.
- You must then press and hold the ‘Home’ button for at least 10 seconds.
- Check that the remote works before releasing the ‘Home’ button.
That’s all there is to it; you’ve learned how to pair the remote with your Firestick device. If this doesn’t work on the first try, try a few more times because it’s known to take a few tries.
Obstructions & Distance
Your Firestick remote device may be in fine working order, but it won’t work due to obstructions and the distance from the device. Keep in mind that you don’t need a straight line of sight to use the Firestick, but if there are too many obstructions, they are going to decrease the distance from which the remote can work, so keep that in mind.
Solution: Move closer to the Firestick device and see whether it works. Whether it does, you know the problem is with the obstructions that decrease the range. Place the Firestick in a less blocked area to get the required distance.
The problem with a Bluetooth remote is that you don’t need a line of sight, which is excellent. There is going to be interference, and the remote is not going to work correctly if there are any wireless devices and/or exposed coaxial wires surrounding the Firestick device.
Solution: To identify which of these devices is generating the interference, try turning them off one at a time and seeing if the remote works after each one. You will be able to identify the offender this way, and all you have to do is move them away from the Firestick device.
After you buy a replacement remote, this issue generally occurs. Regardless of what you do, the remote will differ from your device. There are seven official Firestick remotes, which may or may not work with each version of the Firestick device.
Solution: In this case, the only solution is to change the remote or to buy a new one. But before you do so, choose the right Firestick device.
The Amazon Firestick is an incredible device that works flawlessly; nevertheless, there are a few times when the remote stops working. Hopefully, this post has assisted you in determining and troubleshooting any problems you may be experiencing with the remote. If you have any questions or recommendations concerning the post, please leave them in the comments box below. I’ll be quick and assist everyone experiencing problems using this device’s remote. Thank you for reading, and I hope you found this article interesting.